Single Beer tap Tower with 1/4 Barb & 0-60psi CGA-320 Co2 Regulator & 10FT Beer Dual Lines Kit

Beer Tap Tower & Co2 Regulator & 10FT Dual Lines Kit

• Lock Ring & Constant Pressure Design: The dual-stage co2 regulator maintains a stable output pressure by reducing it in two steps.The adjustment knob has a locking nut; simply turn the locking ring counterclockwise to loosen it, adjust the pressure, and then lock the PSI value. This design effectively prevents accidental pressure setting changes from impacts. And, the locking ring only needs to be moved when pressure readjustment is required.
• Rotating Threaded End Fitting:The regulator can be fitted with either a 1/4-inch or 5/16-inch barb fitting as needed, for connecting hoses with 1/4“ I.D and 5/16” I.D.(Note: Always check beforehand whether a white gasket is installed at the single-gauge connection point. Ensure one white gas washer is inserted before connecting the regulator to the cylinder to prevent gas leakage.)
• Easy To Adjust Knob & Safe Relief Valve: The keg adjustment knobs of the beer keg regulators are easy to turn and precise fine-tuning CO2 levels from 0-50psi. The pressure relief valve will automatically release the keg pressure at around 50psi pressure for safety (Note: Only Fine-tuning CO2 levels from 0-50psi.it is not a leak).
• Full Set Of Kegerator Replacement Parts Kit: This kegerator tower kit comes with a 3” stainless tower, 5ft beer line, faucet spring, beer faucet, faucet cover, faucet brush, tap handle, screws, washer and nuts, 1/4" barb connector, hose clamp, faucet wrench, and gasket. Provide everything you need for the Kegerator and countertop installation.
• Pre-Installed Accessories: The 5ft 3/16’’ ID beer lines and beer tap shank are pre-installed in the beer tap tower to save you time. You can install your single-tap beer tower into your kegerator or countertop in just minutes.